Packet Tracer – Skills Integration Challenge (Instructor Version)
Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.
Topology
Addressing Table
Scenario
In this activity, two routers are configured to communicate with each other. You are responsible for configuring subinterfaces to communicate with the switches. You will configure inter-VLAN routing with RIPv2, VLANs with VTP, trunking, and EtherChannel with PVST. The PCs and Internet devices are all preconfigured.
Requirements
You are responsible for configuring routers R1 and R2 and switches S1, S2, S3, and S4.
Note: Packet Tracer does not allow assigning point values less than 1. Because this activity is checking over 150 items, not all configurations are assigned a point value. Click Check Results > Assessment Items to verify you have correctly configured all items.
Inter-VLAN Routing
On R1 and R2, enable and configure the subinterfaces with the following requirement:
- Configure the appropriate dot1Q encapsulation.
- Configure VLAN 99 as the native VLAN.
- Configure the IP address for the subinterface according to the Addressing Table.
Routing
Configure RIPv2 using the following requirements:
- Do not advertise the network connected to the Internet.
- Disable autosummarization.
- Disable RIP updates for each subinterface.
VTP and VLANs
Configure S1 as the VTP server. Configure all other switches as VTP clients. They are not allowed to create VLANs.
- VTP domain is CCNA.
- VTP password is cisco123.
Create VLAN 10, 20, and 99 on S1.
Configure the following static ports for S1 and S2:
- F0/1 – 9 as access ports in VLAN 10.
- F0/10 – 19 as access ports in VLAN 20.
- F0/20 – F24 and G0/1 – 0/2 as the native trunk for VLAN 99.
Configure the following static ports for S3 and S4:
- F0/1 – 9 as access ports in VLAN 10.
- F0/10 – 20 as access ports in VLAN 20.
- F0/21 – F24 and G0/1 – 0/2 as the native trunk for VLAN 99.
EtherChannels
- All EtherChannels are configured as LACP.
- All EtherChannels are statically configured to trunk all VLANs including VLAN 99 as the native VLAN.
- Use the following table to configure the appropriate switch ports to form EtherChannels:
Spanning Tree
- Configure per-VLAN rapid spanning tree mode for all switches.
- Configure spanning tree priorities according to the table below:
Connectivity
- All PCs should be able to ping the Web and other PCs.
Scripts
!R1 enable configure t interface GigabitEthernet0/0 no shut ! interface GigabitEthernet0/0.1 encapsulation dot1Q 99 native ip address 192.168.99.1 255.255.255.0 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 192.168.10.1 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 192.168.20.1 255.255.255.0 ! router rip version 2 network 192.168.1.0 network 192.168.10.0 network 192.168.20.0 network 192.168.99.0 passive-interface GigabitEthernet0/0.1 passive-interface GigabitEthernet0/0.10 passive-interface GigabitEthernet0/0.20 no auto-summary end copy run start
!R2 enable configure t ! interface GigabitEthernet0/0 no shut ! interface GigabitEthernet0/0.1 encapsulation dot1Q 99 native ip address 192.168.99.2 255.255.255.0 ! interface GigabitEthernet0/0.10 encapsulation dot1Q 10 ip address 192.168.10.2 255.255.255.0 ! interface GigabitEthernet0/0.20 encapsulation dot1Q 20 ip address 192.168.20.2 255.255.255.0 ! router rip version 2 network 192.168.1.0 network 192.168.10.0 network 192.168.20.0 network 192.168.99.0 passive-interface GigabitEthernet0/0.1 passive-interface GigabitEthernet0/0.10 passive-interface GigabitEthernet0/0.20 no auto-summary end copy run start
!S1 enable configure t vtp mode server vtp domain CCNA vtp password cisco123 vlan 10 vlan 20 vlan 99 exit interface range f0/1 - 9 switchport mode access switchport access vlan 10 inte range f0/10 - 19 switchport mode access switchport access vlan 20 interface range f0/20 - 24, g0/1-2 switchport mode trunk switchport trunk native vlan 99 ! interface range g0/1 - 2 channel-group 1 mode active interface range f0/21 - 22 channel-group 5 mode active interface range f0/23 - 24 channel-group 3 mode active ! interface po 1 switchport mode trunk switchport trunk native vlan 99 interface po 3 switchport mode trunk switchport trunk native vlan 99 interface po 5 switchport mode trunk switchport trunk native vlan 99 ! spanning-tree mode rapid-pvst spanning-tree vlan 10 priority 4096 spanning-tree vlan 20 priority 8192 end copy run start
!S2 enable configure t vtp mode client vtp domain CCNA vtp password cisco123 interface range f0/1 - 9 switchport mode access switchport access vlan 10 inte range f0/10 - 19 switchport mode access switchport access vlan 20 inte range f0/20 - 24, g0/1-2 switchport mode trunk switchport trunk native vlan 99 ! interface range g0/1 - 2 channel-group 2 mode active interface range f0/21 - 22 channel-group 6 mode active interface range f0/23 - 24 channel-group 3 mode active ! interface po 2 switchport mode trunk switchport trunk native vlan 99 interface po 3 switchport mode trunk switchport trunk native vlan 99 interface po 6 switchport mode trunk switchport trunk native vlan 99 ! spanning-tree mode rapid-pvst spanning-tree vlan 10 priority 8192 spanning-tree vlan 20 priority 4096 end copy run start
!S3 enable configure t vtp mode client vtp domain CCNA vtp password cisco123 interface range f0/1 - 9 switchport mode access switchport access vlan 10 inte range f0/10 - 20 switchport mode access switchport access vlan 20 inte range f0/21 - 24, g0/1-2 switchport mode trunk switchport trunk native vlan 99 ! interface range g0/1 - 2 channel-group 1 mode active interface range f0/21 - 22 channel-group 6 mode active interface range f0/23 - 24 channel-group 4 mode active ! interface po 1 switchport mode trunk switchport trunk native vlan 99 interface po 4 switchport mode trunk switchport trunk native vlan 99 interface po 6 switchport mode trunk switchport trunk native vlan 99 ! spanning-tree mode rapid-pvst spanning-tree vlan 10 priority 32768 spanning-tree vlan 20 priority 32768 end copy run start
!S4 enable configure t vtp mode client vtp domain CCNA vtp password cisco123 interface range f0/1 - 9 switchport mode access switchport access vlan 10 inte range f0/10 - 20 switchport mode access switchport access vlan 20 inte range f0/21 - 24, g0/1-2 switchport mode trunk switchport trunk native vlan 99 ! interface range g0/1 - 2 channel-group 2 mode active interface range f0/21 - 22 channel-group 5 mode active interface range f0/23 - 24 channel-group 4 mode active interface po 2 switchport mode trunk switchport trunk native vlan 99 interface po 4 switchport mode trunk switchport trunk native vlan 99 interface po 5 switchport mode trunk switchport trunk native vlan 99 ! spanning-tree mode rapid-pvst spanning-tree vlan 10 priority 32768 spanning-tree vlan 20 priority 32768 end copy run start
